700 Tubing & Fittings
700 Drip
Irrigation Tubing and Fittings.
Our .700, 1/2" Mainline Poly Tubing is made with
commercial grade, high quality low density polyethylene resin. It has a 2%
carbon black additive for maximum UV resistance. Our poly drip
irrigation tubing hose tubing can last 7 years in direct sunlight and more if
covered with mulch. Our product is made in the USA. The .700 tubing is the same
type used by Agriculture, Commercial Growers, Professional Landscapers and
Homeowners alike.
Our compression
fittings work by an internal compression ring that squeezes the drip tubing or
soaker hose, in turn holding it in place and creating a water tight seal.
Tip:
When using poly tubing/soaker with compression fittings, cut the tubing/soaker hose
at a very slight angle. This will allow you to start the tubing or soaker hose
easier, as you wiggle it into the compression fitting. Be careful you don't wiggle it too much , or you will cause the hose to kink.
