|100' x .700 OD x 1/2" ID Soaker Hose can be identified with it's "Red Stripe". Bulk Soaker Hose offers the perfect delivery of water to plants. Made from recycled materials, 70% from recycled rubber and 30% recycled polyethylene products that are re-pelletized for use in the process. Bulk Soaker hose means there are NO fittings on the hose. In turn, you can cut to desired lengths to create your own custom system. |
Can be run in lengths up to 150', but not to exceed 500' off one water supply.
GPH is approx.142 gallons per hour, per 100' at 25 psi, depending on inlet pressure & water hardness.
Shorter lengths will have an increase in gph.
700 Soaker Hose uses the .700 fittings/tubing. This hose DOES NOT use our 1/2" barb fittings.
Soaker Hose should be used on flat surfaces not exceeding a 2' rise over 100'.
A pressure regulator is a MUST since Soaker Hose is designed to work at low pressure.
We recommend using a Soaker Hose pressure regulator, 200 mesh filter, backflow preventer, and a calcium filter (if you have hard water) to help preventing clogging of the Soaker Hose.
INSTALLATION / DESIGN HELP TIPS & CARING FAQ's