|
|
||||
 |
|
|
||
|
|
||||
Irrigation stakes hold drip tubing/soaker hose in place.
|
|
1/4" Tubing Stakes |
 |
 |
#65730
|
#16.056
|
| #1229 1/4" Hook Stake | #16016 6" Clip Stakes | 1/4" Stakes | |
| 3½" plastic stakes hold 1/4" tubing in place next to plants. When you want to secure 1/4" tubing with a dripper in place at the base of a plant or in a pot, push the micro tube into the notched end at the side of the tubing holder stake and push the tapered end into the ground. |
1/4" micro tube snaps into place easily when
using the clip on support stakes. By elevating emitters with these stakes
it's easier to see if they are plugged while system is operating.
|
1/4"
loop stakes are used to hold down 1/4" tubing/soaker hose in place.
Made of galvanized
steel. #65730 - 4" bags of 10 #16.056 5" bags of 100 |
|
$6.95
(bag of 100)
|
$3.99 (bag
of 25)
$12.99
(bag of 100)
|
$1.49
(bag of 10)
$9.99 (bag of 100)
|
|
|
|
|
1/2" Tubing Stakes |
 |
 |
 |
||||||||
| #65731 1/2" Loop Stakes | #R61B 8" Wire Stakes | #129 1/2" Plastic Tubing Stakes | ||||||||
|
1/2" x 6" Loop stakes are used to hold down poly tubing and soaker hose. Use with all of our poly and soaker hose Made of galvanized steel. |
The 1/2" wire stakes are very useful in holding the main line tubing in place allowing for customized contouring of a system and preventing the line from squirming under radical temperature changes and on/off system water flow. Galvanized, rust resistant construction. Slim rigid design for easy insertion. Extra long 8" for firm support. |
Designed to keep low-flow watering lines where you want them. Holds .580 OD thru .710 OD soaker hose or poly in place. Plastic stakes have an exclusive cleated design to hold lines securely. |
||||||||
|
$1.99
(bag of 10)
|
#R61B
$1.69 (bag of 10)
#16.057
$11.99 (bag of 100)
|
$3.00
(bag of 10)
$7.25
(bag of 25)
$28.00
(bag of 100)
|
||||||||
 |
 |
|
1/2" Nail on Clamps |
1/4" Nail on Clamps |
|
1/2" Tubing Mounting Clamp, used to attach 1/2" supply tubing to wood beams or posts. Fits .680 to .710 OD tubing or soaker hose. Will not fit .820. |
1/4" Tubing Mounting Clamp, used to attach 1/4" tubing to wood beams or posts. Tan clamps come in 1/4", works well with sand colored micro tubing. |
|
TC700 1/2"
Black
$4.49
(bag of 25)
|
TC250N 1/4'' Black
$2.99
(bag of 25)
TC250466C 1/4" Tan
$2.99
(bag of 25) |
