|
Punch Tools Punch tools are used in drip irrigation to punch holes into your mainline drip tubing to insert drippers or ¼" fittings for your irrigation system. Use cutters on your mainline poly tubing or soaker hose. (not for use on PVC)
|
|
#472 Pocket Punch Click here for more information on both items #473 Punch N Cut |
|
Great little pocket tool, not only punches holes, but also has a place to put your barbed fitting or emitters on the end of it for easy insertion. Also a 1/4" tubing guide. The notch at the top will help in removing barbed fittings and emitters. Item is approx. 5" long. Use on tubing up to .710. Pocket Punch 360° Using the Pocket Punch |
The Punch N Cut does everything the Pocket Punch does, plus a little more. Use for cutting your poly tubing or soaker hose, up to size .940. Item is approx 10" long.
Punch N Cut 360° Using the Punch N Cut |
| #471 | KP Punch Tool | #470 - Punch Tool | 16-035 Gun Punch | #216 - 1/4'' Kit |
|
|
|
|
|
![]() |
| Metal tip, slightly larger. Easy to hold. | Also use to tighten some micro sprayers into risers. |
Simple plastic punch tool. |
Punches tubing up to .940. Clean, quickly and neatly. |
Kit contains:
|
|
|
|
|
|