Pressure regulators reduce incoming water pressure.

Catalogs

Technical Information

Videos

Customer Comments

Pressure regulators reduce the pressure entering your system to the recommended operating pressure of the drip/micro sprinkler or soaker hose system that you are using. That pressure should be around 25-30 psi for drip and soaker hose, and no more than 60 psi for micro sprinklers/sprayers. The pressure of your system is VERY IMPORTANT, especially with soakerhose and knowing which regulator to get. Regulators can only take so much pressure, coming in to them. So please look for that information on our regulators, printed in purple. If your pressure exceeds this psi, and you purchase the wrong regulator, it will cause it to malfunction and water will come out a little hole on the side of the regulator. The regulator will no longer work if this happens.Know your pressure! Get a gauge.

Without the pressure regulator, a system may have leaks, poly and soaker hose can burst, or connections may fail. Most are garden hose threads, those with pipe thread fittings are marked in red. If using a timer, your regulator should be installed after the timer, as they should not be under constant pressure.

PRESSURE GAUGE

#91130 $9.99

Attaches directly to your faucet (hose threads)

ALL OF THESE REGULATORS WILL WITHSTAND 70 PSI COMING INTO THEM. IF YOUR PRESSURE IS HIGHER THAN THAT, YOU WILL NEED ONE OF THE ONES BELOW THAT CAN WITHSTAND A HIGHER PRESSURE.

Regulator for most drip and micro sprinkler systems: 25 psi	Heavy Duty Regulator for most drip and micro sprinkler systems: 25 psi	Regulator for most soaker hose systems: 25 psi

#902H25 - Hose thread.	Above or below ground installation.	#105 (Fiskars Brand™) Hose thread.
$6.95	Withstands severe water hammer.	$9.95
	#PRM25HFM - Hose Thread $10.95
	#PRM25PFM - 3/4" Pipe Thread $10.95

Heavy Duty Regulator for most drip & soaker hose systems: Above or below ground installation. Withstands severe water hammer.
	Reducing pressure to 15-20 psi
#PRM20HFM 20 PSI Hose Thread $10.95		#PRM15HFM 15 PSI Hose Thread $10.95

Heavy Duty Regulator for most drip & soaker hose systems: Above or below ground installation. Withstands severe water hammer.
	Reducing pressure to 10 psi.
#PRM10HFM 10 PSI Hose Thread $10.95		#PRM10PFM 10 PSI 3/4" Pipe Thread $10.95

Adjustable Pressure Regulator & Gauge Large plastic adjustment knob, makes it easy to precisely dial in the desired system pressure. Perfect for hard to control pressure and RV's.		#R450C $39.99
Maximum inlet pressure: 150 PSI.
Outlet adjustable: 5-50 PSI.
Hose thread inlet/outlet.
Maintains selected pressure for circuits totaling 5-250 GPH.
Inlet: 3/4" F.H.T. swivel.
Outlet: 3/4" M.H.T. thread.

Direct acting pressure regulators are specifically designed for use where accurate and reliable control of line pressure is required, regardless of fluctuations in upstream pressure and/or flow. The use of a rolling diaphragm completely separates the spring assembly from dirt or contaminants in the flow stream and provides long trouble free service while ensuring immediate response to flow and pressure variations.

The caps on these (white or red) need to be removed to adjust flow.

	18-007 Adjustable Pressure Regulator 28-60 PSI $15.99
	18-008 Adjustable Pressure Regulator 12-35 PSI $15.99

Adjustable with a single screw Rolling diaphragm keep the spring assembly free of debris Reliable control regardless of fluctuation in upstream pressure or flow 3/4" NPT female thread (Pipe Thread) Maximum recommended flow for drip system: 10 gpm Pressure range: 12 to 60 PSI (.85 to 4.1 bar) Maximum inlet pressure: 125 PSI (8.6 bar) Flow range: .2 to 22 gpm (.45 to 5 m3/h) Dimensions: 4" H x 3 7/16" W (10cm x 19 cm W) Color white: minimum psi 12; maximum psi 35 (.85 bar to 2.4 bar) #18-008 Color red: minimum psi 28; maximum psi 60 (1.9 to 4.1 bar) #18-007	------------------------------------------------------------------
	By using the following fittings, you can convert these regulators to work with hose threads.

	FHS-34MP- Female Hose Thread x 3/4'' Male Pipe Thread .99	MHA-34MP- Male Hose Thread x 3/4'' Male Pipe Thread. .79

1" FPT Adjustable Pressure Regulator

Adjust between 20-50 PSI by turning the screw under the red cap + or -. High quality, accurate rolling diaphragm, w/ stainless steel spring, allows for pressure adjustment of up to 50 PSI regardless of upstream pressure.