|
||||||
![]() |
||||||
|
Mr. Soaker Hose .820 OD Porous Professional/Commercial Bulk Soaker Hose |
|
|
|
Use this size if you need to run an individual piece up to 250' |
||
|
Can be run in lengths up to 250', but not to exceed 500' off one water supply. New formula as of 7/7/10, more flex, more life, more water! |
|
|
|
|
|
.820 Compression Fittings
|
other fittings, click
here
|
| .820 Female Comp. Hose End | .820 Comp. Coupling | .820 Comp. Elbow |
![]() |
![]() |
![]() |
|
3/4" Female Hose Thread (FHT) Swivel Adapter X .820 POLY tubing connects poly tube to any 3/4" water source. Hose thread |
Compression Coupling .820 - Hose connector connects 2 pieces of .820 OD tubing together. |
Use to achieve a 90 degree turn using .820 OD (outside diameter) poly tubing or soaker hose. |
$2.29
![]() |
.99
![]() |
$1.59
![]() |
| .820 Comp. Tee | .820 Comp. Male Hose End | .820 Comp. End Cap |
![]() |
![]() |
![]() |
|
Use to connect three pieces of .820 OD Polytubing or soaker hose to achieve a three-way layout. |
Connects .820 OD tubing to female hose connections or an endcap. | Use to close the end of .820 OD tubing. Unscrew cap to flush clean. |
$2.29
![]() |
$1.29
![]() |
$1.79
![]() |
| .820 Female Swivel Tee | .820 Male Hose End Tee | .820 Shut Off Valve |
![]() |
![]() |
![]() |
|
Swivel Tee attaches to any male hose end. |
Male Hose end Tee attaches to any female hose end. |
.820 Inline Compression Valve Compression inlet/outlet shut-off. For water pressure up to 60 PSI. |
$2.99
![]() |
$3.29
![]() |
$3.29
|
| 778Tee | 887Tee | 87Coupling |
![]() |
![]() |
![]() |
|
For use with 2 ends of .700 and 1 end .820. For connecting .700 polypipe with .820 soakerhose. Compression fitting. .700 x.700 x.820 |
For use with 2 ends of .820 soakerhose and 1 end .700 polypipe. Compression fitting. .820 x.820 x.700 |
Use to connect .820 & .700 tubing or soakerhose together. Compression fitting. .820 x .700 |
|
$2.49
|
$2.49
|
$1.99
|
|
Other items for your soaker hose system
|
| #65731 1/2" Loop Stakes | R61B 8" Wire Stakes | .820 x 3/4" PVC Insert | PTC1 Tube Cutter 1/2''-1 1/2'' |
|
|
|
![]() |
![]() |
|
6" Galvanized, rust resistant. |
8" Galvanized, rust resistant. | These inserts glue inside 3/4" PVC fittings to make your own custom fittings. |
Hardened tool steel blade. Spring loaded handle. Cuts up to 1 1/2" Tubing. |
|
(Do not use plastic stakes, they don't fit) |
$1.99
(bag of 10)
|
$1.69 (bag of 10)
![]() |
.40
|
(not
for pvc) $8.99ea.
|
| #130-1 ½ gpm (50' - 99') | #130-2 1 gpm (100' - 199') | #130-3 2 gpm (200' - 400') | #130 Set of Flow Disc | |||
![]() |
![]() |
![]() |
![]() |
|||
2 each
$1.29
![]() |
2 each
$1.29
![]() |
2 each $1.29
![]() |
2 each
$2.99
![]() |
|||
|
Regulates the flow (not the pressure) of water into the soaker hose. This helps ensure a more equal water distribution from end to end. You would use a flow disc when you are receiving more water at the beginning of your soaker hose run. Available in different sizes for different lengths of runs. |
|
|