|
||||||
![]() |
||||||
|
Deluxe Bulk
Soaker Hose can be run
in lengths of up to150' Mr. Soaker Hose "Red Stripe" .700 OD Deluxe Soaker Hose. Now color coded to help identify proper size. Made from 100% recycled materials, 50% from recycled rubber and 50% recycled polyethylene products that are re-pelletized for use in the process, here in the USA. Bulk Soaker hose means there are NO fittings on the hose. In turn, you can cut to desired lengths to create your own custom system. Simply use standard .700 od poly tubing and fittings. Never use barb fittings as they tend to diminish the flow rate. Installing the hose system in your garden is simple enough for just about anyone to do. An underground soaker system is the most effective, because you don’t lose any water to evaporation, and you can soak the roots of plants at a deeper level. Installing your soakers underground is most practical if you’re planning a new garden. You can incorporate the hoses into the garden design, and bury them as you plant your garden. An aboveground soaker system is much easier to install for an existing garden, and the hoses can easily be moved whenever necessary. This type of soaker system is still extremely efficient and effective. You simply place the hose along the ground around the base of your plants, or better still, bury them under garden mulch. If the hose crosses an area of the garden which doesn’t require watering, you simply connect a section of poly tubing. Up to 600' of soaker hose can be operated from a single house faucet. Remember, the 600' must be divided into sections |
|
|
None of which can be greater than 150' in length. |
|
|
Same size as the old Aquapore red stripe or Orbit Bulk Soaker Hose |
|
|
.700 Mainline/Poly Tubing |
|
|
|
50'
$8.99
|
|
|
|
.700 Compression Fittings other fittings, click here |
| .700 Female Comp. Hose End | .700 Comp. Coupling | .700 Comp. Elbow |
![]() |
|
![]() |
|
3/4" Female Hose Thread (FHT) Swivel Adapter X .700 POLY tubing connects poly tube to any 3/4" water source. Hose thread |
Compression Coupling .700" - Hose connector connects 2 pieces of .700 tubing together. | Use to achieve a 90 degree turn using .700 OD (outside diameter) polytubing or soaker hose. |
|
|
|
.89ea
![]() |
.45ea.
|
.69ea.
|
|
|
| .700 Comp. Tee | .700 Comp. Male Hose End | .700 Comp. End Cap |
![]() |
|
![]() |
|
Use to connect three pieces of .700 OD Polytubing or soaker hose to achieve a three-way layout. |
Connects .700 OD tubing to female hose connections or an endcap. | Use to close the end of .700 OD tubing. Unscrew cap to flush clean. |
|
|
|
.72ea.
|
.45ea.
|
.75ea.
![]() |
| .700 Comp. Shut Off Valve | .700 Female Swivel Tee | .700 Male Hose Thread Tee |
![]() |
![]() |
|
|
.700 Compression Valve |
Swivel Female Tee Adaptors Hose thread connects two hoses to 3/4" male hose thread (faucet). For water pressure up to 60 PSI. |
.700 Male Hose thread compression tee. |
|
|
|
$1.99ea.
![]() |
$1.25ea.
![]() |
$1.25ea.
|
| .700 End of Line Auto Drain | .700 In Line Auto Drain | .700 Comp. Male 'Pipe' Thread |
|
|
![]() |
|
|
This valve opens when line pressure drops to 2.5 PSI. Install at the lowest point or end of your mainline to keep lines drained in cold weather climates to prevent lines from freezing. Fits .700 OD tubing. |
This valve opens when line
pressure drops to 2.5 PSI. Place the Tee (.700) at the lowest point of your
main lines. Keeps lines empty of water to help prevent freezing in colder climates. |
Connects .700 OD tubing to 3/4" pipe thread connections. Does not screw onto a garden faucet or garden hose. |
|
|
|
|||||||||||
$1.75ea.
![]() |
$2.69ea.
|
.69ea.
|
| PVC x .700 Comp. Adapter | 1/2'' PVC Insert x .700 Tube | .700 Female 'Pipe' Thread Swivel |
|
|
|
![]() |
|
Use to connect .700 tubing to
PVC. |
These Inserts glue inside 1/2" PVC fittings to make your own custom fittings. |
3/4" Female Pipe Thread Swivel x Compression Adapter. Connects poly hose to 3/4" male pipe thread. Washer included. Does not screw onto a garden faucet or garden hose. |
|
|
|
|
.79ea.
|
.30ea.
|
$.90ea.
|
| PTC1 Tube Cutter 1/2''-1 1/2'' |
![]() |
| Hardened Tool Steel Blade Light Weight Spring Loaded Handle Cuts up to 1 1/2" Tubing (NOT PVC) $8.99ea. |
|
Other items for your soaker hose system
|
|
#105 Pressure Regulator |
#51054 Brass #106 Plastic |
#108 200 Mesh Filter |
#129 Hold down stake |
|
Brings water pressure down for proper use of soaker hose. |
Keeps contaminated water from backing up into your main water supply. |
Catches particles from your water supply. Cleanable. |
1/2" Stakes secures tubing to the ground. |
![]() |
![]() ![]() |
![]() |
|
|
$5.95
|
|||
|
Garden hose thread. |
|||
|
|
| #130-1 ½ gpm Flow Disc | #130-2 1 gpm Flow Disc | #130-3 2 gpm Flow Disc | #130 Set of Flow Disc | |||
![]() |
![]() |
![]() |
![]() |
|||
2 each $1.29
![]() |
2 each $1.29
![]() |
2 each $1.29
![]() |
2 each $2.99
![]() |
|||
| A flow disc regulates the flow (not the pressure) of water into the soaker hose. This helps ensure equal water distribution from end to end. You would use a flow disc when you are receiving more water at the beginning of your soaker hose run. Available in different sizes for different lengths of soaker hose (1/2 GPM 50' - 99', 1 GPM 100' - 199' and 2 GPM 200' - 400'). | ||||||
|
Specs for MrSoakerHose Deluxe Soakerhose: http://www.mrsoakerhose.com/deluxe.htm |
|
Deluxe Bulk Soaker Hose can be run in lengths of 150'. |