Aquapore/Fiskars professional soaker hose seeps water the entire distance of the pipe. Made in part from recycled automobile tires.

.710 Professional Series Porous Pipe

Made in part from recycled automobile tires. Fiskars professional soaker hose seeps water the entire distance of the pipe. .710 compression fittings should be used. A filter is highly recommended, and possibly a calcium inhibitor filter for areas with hard water. For use on a well system a filter is a MUST. This low pressure system is designed to work with a Fiskars pressure regulator. Not recommended for hilly terrain. Maximum run length is 100'.

Available in 100' and 500'Rolls (Discontinued by Mfg. Limited quantity available)

SOLD OUT, ALL GONE

SEE MR SOAKERHOSE DELUXE SERIES

This tubing is NOT the same as the 1/2" moisture master bulk hose, and does not use the same fittings.

This hose uses the standard drip .710 compression fittings and tubing.

The flow rate is .80-1.20 GPM per 10' of hose with a Fiskars regulator. Burst pressure is 90 PSI.

We recommend using at least a 150 mesh filter and or a calcium filter to help prevent clogging of the soaker hose.  #129 plastic stakes secure the tubing to the ground.

Color: Black dull finish with 2 parallel red stripes.

Pipe is to run across the face of the slope. Never run porous pipe vertically up or down slope. Porous pipe is not to have more than 2' elevation for 100' or more of pipe run. Spacing of porous pipe, average 15" oc for specialty turf, 24" oc for shrubbery and 12" oc for ground cover. Depth average is 6". Depth may vary from 4" to 8", adjustment of pipe layout may be necessary to accommodate plantings. Place porous pipe 4" to 6" from walkways, curbs and pavement. Area's where no water is needed, or in running your water supply to the designated area's use .710 Mainline tubing.