Drip Irrigation - Micro Sprinklers

#AST-06 Adjustable Spray Spinner. Spray pattern can be adjusted to reduce volume of flow and radius of throw.

Full circle.10-32 thread 0-26.5 gph 0-24' diam @ 25 psi

#AST-06 $4.95 (bag of 5)

#AST-06 $79.99 (bag of 100)

Micro Spinners	#MST-04 (blue)	#MST-05 (green)	#MST-06 (red)
10-32 thread

11.7 gph, 19' diameter, @25 psi

$2.25 (bag of 5)

$39.99 (bag of 100)

19.5 gph, 21' diameter, @25 psi.

$2.25 (bag of 5)

$39.99 (bag of 100)

26.5 gph, 23' diameter, @25 psi

$2.25 (bag of 5)

$39.99 (bag of 100)

Bags of 100 only
Quantity	Discount
5 - 10	$35.99 ea.
11 +	$31.99 ea.

Adjustable Micro Spinner #67113

Flow control knob adjusts water flow from 0-30 GPH at 25 psi.
10-32" thread 1/4" barb connection.
Universal-works with most drip systems.
10' maximum spray radius. 360° spray.
5 per pack.
$2.99

Adjustable Micro Spray on 12" Stake

1/4, 1/2, full, strip patterns. $1.69 ea.

#67138 90° (quarter circle) 9.8' radius @ 25 PSI
#67137 180° (half circle) 10.1' radius @ 25 PSI
#67136 360° (full circle) 13.2' radius @ 25 PSI
#94435 Strip 2'x 10', 0-29 gph @ 25 PSI

		Covers a large diameter, up to a 26' full circle using 21 gph, with medium size droplets. Use to irrigate flower beds, ground cover and large trees. Prepackaged sprinklers come with heads for 360°, 180°, 90° and strip spray. Ideal spacing for this model: 12' to 16' between the sprinklers and 14' to 16' between the laterals.
		Comes with 5 full circle heads attached, and additional 5 each of the 1/4, 1/2 and strip pattern heads.
		$14.99 (bag of 5)

	Full circle Micro Sprinkler with Spinner on 13" spike with 24" microtube and barb.

	Uniform water distribution up to 27' (8.2 m) diameter full circle
	Low flow rate enables the head to operate with a large number of micro sprinklers
	Operating pressure: 20 to 35 psi (1.4 to 2.4 bar). Nominal flow rates: 11 to 14 gph (41 to 79 l/h)
	Diameter: 21' to 25' (6.3 to 8.1 m) 360 degree. 23.4' Diameter, 12.6 gph at 25 PSI

	$1.60 ea.

9" Micro-pop Spring Loaded Micro Riser

Unit is aprox. 12". Requires at least 25 psi to operate. The 9" riser pops up and then drops down out of sight when not in use.

Micro sprayers for the top of the riser are sold separately. Use any 10-32 threaded sprayer.

Comes with 12" of ¼" micro tubing with a barb connector to connect directly to your drip system.

~~$7.99~~ ~~ea.~~ $4.99

Semi rigid riser with 1/4" barb.

Use with 10/32 threaded sprayers.
Snaps into 13'' stake #16-025

#16-036 8" riser .30 ea.
#16-038 12" riser .31 ea.
#16-044 16" riser .34 ea.

#16-025 13" Stake

Quantity	Discount
250 +	$0.32 ea.

.38 ea.

#16-048 Stake & 12" Riser .69 ea.

Quantity	Discount
250 +	$0.59 ea.

#16-049 Stake & 16" Riser .75 ea.

Quantity	Discount
250 +	$0.64 ea.

#2411 - Turbo-flo adapter.

1/2" Female Pipe Thread x 10-32 thread

#RRAB -1/4" Barb x 10-32 Thread.

Threaded end screws into rigid riser.

#RRAT - 10-32 thread x 10-32 thread.

$1.29 (bag of 10) $10.99 (bag of 100)

.45 ea.

Micro sprinkler watering schedule
		Watering Frequency
Type of plants	Watering time	In hot climate	In warm climate	In cool climate
Flower beds, ground cover	30 minutes-1 hour	1-2 days	3 days	4-6 days
Small trees	1-2 hours	2-3 days	4-5 days	5-6 days
Medium trees	2-3 hours	2-3 days	4-5 days	6-7 days
Large trees	2-5 hours	2-3 days	4-5 days	5-7 days
Greenhouses or hothouses	5-10 minutes	2-4 times/day	2 times/day	1 time/2 days

	Micro sprinklers spray water over a wide area when low volume overhead irrigation is desired
	Designed for areas where drippers are not practical, such as larger areas of ground cover, small flower beds, or oddly shaped areas.
	Like all low volume irrigation systems, they may require a pressure regulator, & filters are highly recommended to prevent clogging.
	They come in variety of flow rates and diameters.
	Be sure to check out our sprayers for 1/8" tubing, microfoggers, microsprayers and drippers pages for more irrigation needs.
	Other items you might look at would be punch tools, micro fittings and poly tubing.