|
EZ-FLO Main Line
Systems Feed the Entire Landscape Automatically Every time You Water
EZ-FLO Main Line Systems attach directly to your in-ground
sprinkler and/or drip irrigation system. Every time you use your irrigation
system, EZ-FLO releases small, precision doses of water soluble or liquid
non-hazardous fertilizers into the water stream. One system will feed
through both sprinkler and drip irrigation zones without the need to
make any adjustments or nozzle changes.
Main Line Systems have been designed to connect directly to your irrigation
system after an approved
backflow prevention device (see bottom of page). They are designed to withstand constant
static water pressure present in your irrigation system. These units are
constructed of heavy-walled UV-Resistant PVC and have no moving parts making
them very reliable, dependable and maintenance-free.
EZ-FLO Systems are Easy to Install and Easy to Use
EZ-FLO Systems can be installed in minutes. We recommend
that they be installed in an underground valve box but they can also be
hidden under decorative rocks or housed in above ground structures when
necessary. The only requirement is that they be installed after an approved
backflow prevention device as determined by local plumbing code. See Backflow Information
below
for more details on what these devices do.
 EZ-FLO main line
systems are installed after the backflow prevention device and normally
before the irrigation zone valves to allow the unit to feed all irrigation
zones. A typical installation is shown here:
In this configuration, when an irrigation zone valve is turned on, the
EZ-FLO fertigation unit automatically adjusts to pressure and flow and
precisely meters out the appropriate fertilizer based on the water volume
flowing into that zone.
EZ-FLO main line units can also be installed after the zone
valve or directly in-front of a single zone valve or multiple zone valves if
you want to isolate a zone(s) from the other zone(s). An example is shown
to the right and could be for a larger irrigation system that services lots
of open turf but the owner wants to focus on their flower beds or in the
case of a municipal park, just the baseball field.
Models and Sizes
EZ-FLO manufactures units in varying tank sizes. The size
of the unit represents the approximate capacity of the holding tank for the
concentrated fertilizer and come in the following tank sizes:
EZ 001-CX (includes
Standard PVC Slip Coupling Connector,
choose size 1", 1 1/4", 1 1/2", 2")
1.5 gallon (5.7 liters)
(Spec sheet, click here)
-
EZ001-CX with 1" C100
$198.00
-
EZ001-CX with 1 1/4" C125
$208.00
-
EZ001-CX with 1 1/2" C150
$208.00
-
EZ001-CX with 2" C200
$215.00
EZ 005-FX (includes PVC Ball Valve Coupling connector,
choose size 1", 1 1/4", 1 1/2", 2")
4.25 gallon (16 liters)
(Spec sheet, click here)
this item
ships from the factory in Loomis, CA. Please allow 7-10 working days.
-
EZ005-FX with 1" CBV-100
$474.00
-
EZ005-FX with 1 1/4" CBV-125
$479.00
-
EZ005-FX with 1 1/2" CBV-150
$486.00
-
EZ005-FX with 2" CBV-200
$505.00
EZ 010-FX (includes PVC Ball Valve Coupling connector,
choose size 1", 1 1/4", 1 1/2", 2")
9.4 gallon (35.6 liters)
(Spec sheet, click here)
this item
ships from the factory in Loomis, CA. Please allow 7-10 working days.
-
EZ010-FX with 1" CBV-100
$765.00
-
EZ010-FX with 1 1/4" CBV-125
$769.00
-
EZ010-FX with 1 1/2" CBV-150
$795.00
-
EZ010-FX with 2" CBV-200
$806.00
All models are equipped with shutoff valves for ease of refill and a
pressure relief valve that releases and resets when water pressure in the
tank exceeds 150 pounds per square inch (10 bars). All premium versions
carry a five (5) year manufacturer's warranty. See our
Warranty Section for
further details.
Size the Model to your Landscape
What size model you choose to order is dependent on a few
factors.
What is the composition of the landscape materials? Turf
uses more irrigation water than a dense ground cover or shrubs with deeper
root masses.
How often do you want to refill?
In the end, this last point is the one that is the ultimate
determining factor. If you want to refill less frequently, simply go up in
size. If you do not mind refilling more often, then you can get by with a
smaller size than what would be recommended. The following table identifies
a typical landscape configuration and sizes that can be served with each
EZ-FLO main line model along with other sizing information.
Please note that coverage levels assume a 4-6 week desired
refill cycle for EZ001CX to EZ010-FX models. High capacity models
(designated as HC) are designed for commercial landscapes serviced by
professional maintenance companies. Property sizing for those units is
based on a 2-3 week refill schedule. Growers and nurseries use other sizing
metrics (pounds per square foot and PPM) which can be found in their related
web pages.
|
According
to the ABPA, An RP is a mechanical backflow preventer that consists of two
independently acting, spring-loaded check valves with a hydraulically
operating, mechanically independent, spring-loaded pressure differential
relief valve between the check valves and below the first check valve. It
includes shutoff valves at each end of the assembly and is equipped with
test cocks. An RP is effective against 