Drip tubing and micro tubing in various sizes for drip irrigation systems. 

.580 drip polyethylene tubing 100'.

• Use with .580 compression fittings.
• Operating pressure: 10 to 60 PSI
• Recommended operating pressure: 25 PSI

.700 drip polyethylene tubing 50', 100', 500'. Industry leading durability results from our use of the highest grade resins, ensuring maximum UV protection and no kinking or splitting. May be used above or below ground. Made in the USA.

• Use with .700" compression fittings.
• Operating pressure: 10 to 60 PSI
• Recommended operating pressure: 25 PSI
• Maximum flow rate: 240 GPH
• Sizes: 1/2" .600 ID x .700 OD (.50 wall thickness)

.710 drip polyethylene tubing 100', 500'.  Industry leading durability results from our use of the highest grade resins, ensuring maximum UV protection and no kinking or splitting. May be used above or below ground. Made in the USA.

• Use with .710" compression fittings.
• Operating pressure: 10 to 60 PSI
• Recommended operating pressure: 25 PSI
• Maximum flow rate: 260 GPH
• Sizes: 1/2" .615 ID x .710 OD (.50 wall thickness)

.820 drip polyethylene tubing 100', 500'.   Industry leading durability results from our use of the highest grade resins, ensuring maximum UV protection and no kinking or splitting. May be used above or below ground. Made in the USA.

• Use with .820 compression fittings.
• Operating pressure: 10 to 60 PSI
• Recommended operating pressure: 25 PSI
• Maximum flow rate: 380 gph
• Bending radius: 12"

 .620 drip polyethylene tubing 100', 500'.  Industry leading durability results from our use of the highest grade resins, ensuring maximum UV protection and no kinking or splitting. May be used above or below ground. Made in the USA.

• Use with .620" compression fittings.
• Operating pressure: 10 to 60 PSI
• Recommended operating pressure: 25 PSI
• Maximum flow rate: 180 GPH
• Sizes: 1/2" .520 ID x .620 OD (.50 wall thickness)

1/4" poly micro tubing available in length of 50', 100' to 500'. the micro tube is made of the highest quality polyethylene resins and is UV resistant. For extending drippers and micro sprinklers from main line or as the primary line in a small system. Use with 1/4" barbed fittings.

• Use to distribute water from main pipe to drippers, misters, and low volume sprinklers
• For use with 1/4" barb fittings
• Can be used above or below ground
• Universal-works with most new or existing drip systems

Size: .170 ID (inside diameter) X .250 OD (outside diameter)                  

  1/4" x 50' Vinyl Tubing (.160"–.197" I.D.)