|
|
||||
 |
|
|
||
|
|
||||
|
Dripperline and Laser Tubing |
|
1/4" Microline Tubing: uses 1/4" micro fittings Our ¼” microline tubing brings your drip system to life through ¼” barbed micro fittings and .4gph drippers. These drippers are spaced every six or twelve inches along the tubing, allowing for even watering. Each dripper has two outlets opposing each other, which means if one gets clogged the water won’t stop. The maximum length of tubing for 6” spacing is 18 feet, and for 12” spacing 34 feet is the maximum run. |
This drip irrigation tubing can be used above or below grade or under mulch. It’s made with UV resistant polyethylene resin. Requires at least 155 mesh filter.
|
|||
|
Pressure VS Flow:
|
 |
 |
||
|
6" o.c. Brown |
12" o.c. Brown |
6" o.c. Black |
12" o.c. Black |
|
#ML-106B 100'
$14.99
|
#ML-112B 100'
$11.49
 |
#ML-106 100'
$14.99
|
#ML-112
100'
$11.49
|
|
#ML-506B 500'
$71.99
|
#ML-512B 500'
$55.99
|
#ML-506 500'
$71.99
|
#ML-512 500'
$55.99
|
|
1/4" Black Lazer Drilled
Tubing: Our ¼” laser drilled tubing comes in rolls of 50 or 100 feet. It uses ¼” barbed micro fittings that are spaced at 6 or 12 inches. We recommend lengths of fifteen feet for this type of tubing – this measurement will give you 0.8 to 1.0 gph. Laser drilled tubing makes use of holes that are drilled against the flow of water. Check the tubing for arrows to find out which direction the water should flow. This tubing is made with UV resistant polyethylene resin and requires a 155 mesh filter. |
|
#LZR50-12 -50' x 12" o.c.
$4.99
|
#LZR100-12 -100' x 12" o.c.
$8.99
|
|
#LZR50-9 -50' x 9" o.c.
$5.99
|
#LZR100-6 - 100' x 6" o.c.
$13.99
|
|
#LZR50-6
-50' x 6" o.c.
$6.99
|
|
|
.700 od Dripperline |
|
|
100' |
 |
Dripperline is ideal for elevation changes, long runs and pressure 15-45 psi. The ideal product for your commercial or residential landscape watering needs. Run Aprox. 235' off one line/circuit with a 25 psi. pressure regulator. Run 325' at 45 psi. Backflow device, 200 Mesh Filter recommended. #67366
|
|
12" o.c. |
||
|
1 gph Pressure Compensating Emitters |
||
|
Poly tubing and fittings can be found on this link: .700 Compression Fittings |
